Slippery

Floor is slippery when walking across it.

ROOT CAUSE: Slip requires the presence of a moveable material in the form of oil or dust, on top of a surface that lacks sufficient roughness to resist movement.

ANSWER: Contrary to popular notions – a shiny surface is not necessarily slippery. That said, it is true that generally a smooth surface has a smaller coefficient of friction making it easier to slip when dust or water are present or introduced. That said, different materials have different coefficient of frictions as such the application of wax to a surface will often reduce its coefficient of friction making to more slippery. Similarly the introduction of oils to enhance gloss appearance will result in a more slippery surface.

Similarly, one can slip on what is considered a rough surface – A car traveling at speed can hydroplane on a road when the surface is wet. The water is the moveable media in this case.

As such, one can reducing slip by maintaining a dry, dust free-surface, by removing waxes, and resisting the use of oils to enhance appearance in preference to managing the surface characteristics directly.

SOLUTION: Solutions will vary based on the particulars of your situation including surface type, surface modifications, cleaning strategies, sealing conditions and the presence of wax.

Change in floor finish, topical coatings or the introduction of non-skid media in the form of a coating or tape may all contribute to reduction, but are not suitable in all conditions.

It is recommended that you have a professional craftsman review the particulars of your situation to ascertain specific recommendations.

Products
When it comes to cleaning floors in a manner to reduce the incidence of slip it is generally safe to say that the most important consideration is establishing a frequency based on the expected introduction of dust and water to the surface. The frequency needed can be modified through the use of appropriate matting, selecting mats based on what is needed most and may require use of multiple types to address debris versus water.

Surface modifications should avoid the use of waxes which can modify coefficient of slip to be too high as well as too low.

Surface finishes can be a factor by increasing roughness of the surface.

There are no universal recommendations here as one needs to formulate a strategy consistent with one’s use and surroundings.

Speak to an expert (888) 524-3372